In this guide, we will discuss and fix all the issues related to the Firestick remote. Some of the common issues are such as Firestick remote app is not working, unable to pair with the device, volume, button, lights, mic, battery issues, and more. If you face any of the problems mentioned above, you are on the right page. Here, we have listed all possible causes for a not working Firestick remote. Further, the Firestick remotes are not similar to other remotes we have in the house. Hence, it’s not easy to find out why Firestick remote stopped working all of sudden. So, read the full article to fix your issue in lesser time.
The Amazon Fire TV Stick with Alexa Voice Remote is one of the most popular streaming devices. The reason behind its popularity is 2nd Gen Remote, released in 2019. Amazon FireTVStick has high storage for applications than other media streaming devices. It provides limitless access to Amazon Prime members to stream high-quantity content.
WARNING! STREAM ON FIRESTICK/ FIRETVSTICK 4K ONLY WITH A VPN
ATTENTION! YOUR IP ADDRESS IS PUBLICLY VISIBLE
IP Address : 184.108.40.206
Free streaming of copyrighted Videos, Movies, Music, or any other content online is an illegal activity. It is hard to determine the copyrighted content. Even unknowingly, if you get caught streaming copyrighted content, you might be in big legal trouble.
Governments, Internet Service Providers, Third Parties actively monitor your streaming activities. They can easily reach you through your IP Address and Location.
Hence, I strongly advise you to use thePrivateInternetAccess VPN. Because PrivateInternetAccess hides you from Governments, Internet Service Providers, and Third Parties. Also, it bypasses Geo-Restrictions, Bandwidth Throttling, etc.
Moreover, it has unbreakable 256-bit military-grade encryption that encrypts your internet connection and makes your streaming activities private. So that you remain 100% invisible.
Best VPN for Firestick/ FireTVStick 4K is PRIVATEINTERNETACCESS. GET TWO MONTHS FREE PRIVATEINTERNETACCESS VPN
Table of Contents
Possible Causes if Firestick Remote is not working
There are lots of reasons if a Firestick remote stopped working. Some of the most common issues include Pairing, Device Compatibility, and Sound Issues. Besides that, I have provided the list of most common causes for a Firestick remote that suddenly stopped working. Follow the guidelines we have provided below to fix the issues one by one. If the issue still persists, you can try the factory reset on your Firestick.
1. Due to Distant and Obstruction
Distance might be the cause of Amazon Firestick remote’s not working properly. However, this is not a big issue, but sometimes people ignore small things. As it’s a minor concern and not noticeable, they start proceeding on a higher level of troubleshooting. This is the reason I mentioned it in the very beginning. We should mind the distance from the device to Amazon Firestick remote.
- The range should be within 15 feet from the device.
- If you have a spacious area, carry the remote near to the TV for better streaming.
- Firestick remotes use Bluetooth to connect to the device, not infrared (IR). It doesn’t require a line-of-sight between device and Firestick remote to connect. You only need to pay heed to the distance.
However, if you have any obstruction in between Fire Stick and remote it may decrease the range.
Follow below tips to examine if distance or obstruction is the issue:
- Remove obstructions, if any.
- If the Firestick device is stored towards an amusement shelter, carry it out to check if remote works.
- If the remote works, only when you are near to your Fire TV, I suggest you use the enlarge dongle for reposition.
2. Battery issue
This is the most common issue for Amazon Fire TV Stick Remote users. Generally, there is a chance that the Firestick remote stops working due to battery problems. Reasons for the battery issues are listed below:
- You should insert the battery after cleaning its connectors with a dry cloth, might be possible your Fire Stick remote start working again.
- If the battery is not inserted properly remote do not work, all the batteries consist of ‘+’ and ‘-‘ sides. So, check the ports before inserting them. The + port should be connected to the + side of the connector. If the battery is not inserted properly the Amazon Fire TV Stick remote won’t work.
- Amazon Fire TV Stick Remote user should use good quality, alkaline batteries. Alkaline batteries purchased from the reputed producer keep your Fire Stick remote reliable and long-lasting performance.
- Check if the battery is not charged.
- Further, use the remote battery correctly, for Amazon Fire Stick remote to work well.
Note: Fire Stick Remotes consume more power as compare to other remotes. If you spend lots of time on streaming media, you should use better quality batteries for your Amazon Firestick Remote.
In case, if the problem still persists. Under those circumstances, the battery is not the reason for remote is not working. You should try something else to fix the issue.
3. Check, Firestick Remote is Pairing or not?
Upon buying a new Firestick device that comes with an included remote, you get it pre-paired with your device. You do not need to set up it again. If in case it’s not paired, you need to do it on your own. Further, if you replace your Firestick Remote, you need to pair before using it.
However, if the remote is not pairing with your device or due to network /system issues it becomes unpaired. It won’t work at all. Do not worry, follow the steps given below to pair a remote to Firestick device:
- First of all, you need to plug in your Firestick to High-Definition Multimedia Interface (HDMI) port of the TV.
- Make sure both FireStick and TV are on.
- Wait for the Firestick to boot up.
- Continuously press the ‘Home button’ on your Firestick remote for at least 10 seconds.
- Now, release the button, and check if the remote is working properly.
- If any issue occurs and remote doesn’t start working, hold down the Home button again at least 15-20 seconds. However, sometimes it takes many attempts for this process to operate.
Note: Including a remote controller, Firestick can allow 7 Bluetooth devices. If it’s already connected with 7 devices, you can not connect anymore. Still, if you need to connect, first you have to disconnect at least one of the devices from them.
To disconnect the already connected device, follow the steps below:
- Navigate to the Firestick ‘Home‘ screen, choose Settings.
- Click on the Controllers & Bluetooth Devices, a new window will open, here you can see a list of all the devices connected to Firestick.
- Click on the device that you choose to unpair.
- Kindly, know that sometimes it takes time to pair with Firestick. Try at least 3 to 4 times.
If pairing is the reason for Firestick remote’s not working, definitely, the above point will help you to recover the issue, else try the next resolution.
4. Check Device Compatibility
If you have purchased a new Firestick device then this step is not for you. This step is for the users that have purchased a replacement remote for the existing Firestick device. Kindly, check the remote whether it is compatible or not. If the remote is not working and there is a pairing issue, you must check if the remote you have purchased is compatible with your device. There are many generations of Firestick, Firestick 4K, Fire TV, Fire Stick TV, Fire TV remotes, and each works in a different way. Of course, the remote should be compatible with the device you are using.
Further, you should verify the seller authentication. Because there are some inferior duplicates of the remote with a similar design. These remotes look like the original ones however, do not perform well.
Amazon keeps a list of remotes and devices, that may help you to confirm the remote and device are equally proficient in operating together.
5. Use Phone App if Firestick Remote is Damaged?
If you have tried all the steps but the remote is still not working, probably this is time to admit that the remote has been damaged. Reason can be anything for damage such as drain device, dust, down to the floor (remote maybe crack internally), etc.
In that case, you do not have other options rather than buying a replacement remote for your Firestick. However, it doesn’t cost much. You can buy the remote on Amazon for 8$-12$. There are lots of options, though do not forget to check the review and rating, it should be 4+.
Until you can use your Android or iPhone app as a remote for your Firestick device. To access your Firestick device through your phone, you have to install the Firestick remote application. You can install the app from Google Play Store and Apple Store. The good news is you no need to pay anything for it as it is completely free. Though, you can directly download this app from the below links:
Firestick remote app offers the Alexa Voice control button. If you have decided to install the Remote app, you have to pair this app with your Firestick device also. Follow the steps below:
- Open your Firestick device set for it to boot up.
- Now download and install the Firestick remote app, launch the app.
- Forthwith you have to Sign in for Amazon Firestick remote app.
- Pick your device.
- Wait for a four-digit code to appear on your TV, and insert it in the app.
- That’s all, your app and Firestick device are now paired. Enjoy streaming!
I have explained all the possible causes for which Firestick remote can stop working. Moreover, if you have encountered any other reason. Kindly, let us know through the comment section given below, your reach will be appreciated.